20-80W IP65 LED Panel Lamp for Various Sizes with Dimmable

This series of products used in outdoor place, especially for the rainy and wet,Moisture serious areas.
General indoor panel lights half-and-half outdoor placeApplications can not achieve very good use effect 
and life. 5 the dodgersThe new waterproof LED panel light waterproof aluminum frame structure make the 
waterproof properties is up to the productIP65. Preventing the water vapor and mist. A variety of installation
 method is With building the overall decoration style is interesting, lighting effect already, againLet a person 
feel beautiful and comfortableBackground Technology:



Waterproof panel lamp is a kind of waterproof and dustproof panel lamp, which is mainly composed of light source, cover plate, transparent light guide plate, silicone rubber ring, aluminum strip diffusion plate, frame and EVA gasket.



At present, most of the existing panel lights are fixed with screws to cover plate and frame together, screws in the fixed easy to damage, and is not conducive to disassembly, after many disassembly can no longer continue to use, is not conducive to long-term use, so, we proposed a waterproof panel lamp to solve the above problems.
Technical summary

The utility model discloses a waterproof panel lights, including flat, as described in the bottom of the cover plate connected with the borders, flat roof, opened the first 1 aperture border top side to open the second hole, the hole and the hole on the connected, the first telephone inside the hole and the second hole to install the same slider sliding, and the ends of the slider are extended to the hole on the second hole, The bottom of the frame welding with two fixed block, two fixed at both sides of the pole, the fixed block runs positioning hole, positioning in stem hole sliding locating rod installation, and locating rod ends are extended to locating rod hole, positioning screw hole are limited to open a slot on the inner wall of both sides, limit slot away from the slider bar on the side of the wall welding with spring. The utility model has the advantages of simple structure, convenient use, rapid disassembly of cover plate and frame, convenient disassembly and installation of waterproof panel lamp, saving time and improving work efficiency.








Technical realization elements:



The purpose of the utility model is to solve the shortcomings existing in the prior art, and put forward a waterproof panel lamp.



In order to realize the above purpose, the utility model adopts the following technical scheme:



Waterproof panel lights, including flat, referred to the bottom of the cover plate connected with the borders, flat top side opened the first 1 hole, border top side to open the second hole, the second hole and the hole on the connected, first telephone inside the hole and the second hole to install the same slider sliding, and the ends of the slider are extended to the hole on the second hole, the bottom of the frame welding with two fixed block, Two fixed at both sides of the pole, the fixed block runs positioning hole, positioning in stem hole sliding locating rod installation, and locating rod ends are extended to locating rod hole, the positioning screw hole are limited to open a slot on the inner wall of both sides, limit slot away from the pole on the side of the wall welding have springs, locating rod on a fixed set of sets limit block, The spring and the limit block are fixed and welded, the sliding rod is provided with a positioning hole, and the two positioning rods are close to each other at the end of the positioning hole sliding connection.


Preferably, the inner wall on both sides of the first pass hole is provided with a first slide rail, and both sides of the slide rod are welded with a first slide block, and the two first slide blocks are respectively sliding and installed in the two first slide rails.



Preferably, the inner wall on both sides of the positioning rod through hole are provided with a second slide rail, and the two sides of the positioning rod are welded with a second slide block, and the two second slide blocks are respectively sliding and installed in the two second slide rail.



Preferably, the sliding rod is provided with a plurality of positioning holes, and the positioning holes are arranged on the sliding rod at equal distance intervals.



Preferably, the top of the slide rod is welded with a baffle plate whose diameter is longer than the diameter of the first pass hole.



Preferably, the inner wall of the positioning hole is provided with a non-slip pad, which is in contact with the positioning rod.



Compared with the prior art, the utility model has the following beneficial effects:



In the utility model, through the cover board, frame, the first 1, the second hole, slider, fixed block, positioning rod hole, positioning rod and limit groove, springs, limit block and positioning hole jointly build the waterproof panel lights, when need to cover plate and frame to remove, first of all, through the positioning rod hole, positioning rod, limit slot, spring, with the limit block and positioning hole, Locating rod to slide away from the direction of the positioning hole, when locating rod from positioning hole sliding out in full, in the first 1 hole, the second hole, with the cooperation of slider and fixed block, make the slide bar to slide away from the direction of the fixed block, when the slider from the first telephone inside the hole and the second hole sliding out in full, complete the initiation of plate and frame, the utility model has simple structure, easy to use, The cover plate and frame can be quickly disassembled to facilitate the disassembly and installation of waterproof panel light, saving time and improving work efficiency.